| Home | My Workshop | Lathe Refurbishment | Contact |
| Britannia | Allchin | Calbourne | Stephenson's Rocket |
| Tich | Revolving Cylinder | Pumping Engine | Tools and Jigs etc |
| Class 08 Shunter | Adams Class 460 |
| 5" gauge William Adams Class 460 |
| 1. Frames & motion | 2. Boiler | 3. Platework | 4. Tender | 5. Overview |
| Frames & Motion | ||
| 1. Mainframes | ||
 |
These were purchased as lasercut blanks from Kenions and drilled on the milling machine using the DRO to accurately position the holes. A few variations were made to allow the use of screws currently in stock suvh as M4 countersunk Allen screws to replace the 2BA specified. | |
 Website Created by Steve Sharman. Copyright © 2015 Steve Sharman. All rights reserved |